HOT WATER CIRCULATOR / RECIRCULATOR

ATC-3000

DOES NOT HEAT WATER

  IT CIRCULATES / RECIRCULATES WATER

on-demand, scheduled or combination of both

                 Digital Timer                                           Click for Close-up                                                 1-2-3 Install

            (built-in backup battery)

ATC-3000 Includes                    SHIPS SAME DAY when ordered by 3pm PST  M - F

• ReadyTemp® Optimizer  ATC-3000 with Intelli-Circ Technology

• Digital Timer, 20 Event (built-in battery backup)

• Two 1/2" x 30" Braided Stainless Steel Flex Lines

• 9' White Detachable Power Cord

• Install Guide / Manual / Registration Card

• 2 Year Warranty / 30 Day Money Back Guarantee

A - CONTROL SOCKET  (Standard 3-Prong Wall Socket)
This standard 3-prong socket will accept most any 3 prong control for quick-n-easy control customization.  Many "outlet" control devices are readily available at home improvement stores, big brand stores and the internet. 

Examples:

• Timers (24hr, 7-day, Digital Programmable)

• Motion sensor

• Occupancy Sensor

• Wireless Remote

• X-10 Control

• Energy Management System Integration

• Sound Activated

• Endless other "Outlet Control, Appliance Control, Light Control"

B - CONTROL PLUG (Standard 2-Prong Plug)
This standard 2 prong plug, plugs-in to whatever control device is plugged into (A) interchangeable control socket.  Plugging (B) directly into (A) without any control device enables the ReadyTemp to operate 24 hours a day cycling on and off as needed to maintain the temperature set at (D).

C - ON-DEMAND MODE / ANYTIME SINGLE-CYCLE OVERRIDE (RJ11 standard phone jack)
Allows easy integration of on-demand single-cycle operation and / or scheduled-off anytime override. One cycle means unit would operate until water at the homeowners chosen temperature arrives at the sink then stop. Connect a doorbell button or other momentary contact switch to the two middle wires at one end of a standard phone cord and plug the other end into the RJ11 port. Integrating additional push-buttons is possible by utilizing a 5-to-1 module phone adapter. Thin telephone wire is sufficient since this control function utilizes momentary contact and measured resistance. No power is carried through these lines.

D - TEMPERATURE ADJUSTMENT
Allows homeowner a means of optimizing their homes hot water comfort to their just-right temperature.  People have unique hot water standards, this "have-it-your-way" feature is essential to delivering efficient hot water at the homeowners expectations.  Thus, allowing a homeowner to maximize their hot water comfort without loosing control of their cold water comfort.  Loss of cold water comfort / excess pumping is easily correctable by turning the dial counter clockwise just a hair. Thereby, preventing the over pumping which caused the loss of cold water comfort.  This fine tuning of the temperature setpoint ensures maximum comfort, savings and readiness.  ReadyTemp's full range of temperature choices and extremely accurate half-a-degree incremental adjustment capabilities offers the homeowner the means of preventing their homes water pipes from freezing during frigid outdoor temperatures. 

E - HOT WATER SUPPLY CONNECTION 1/2" connection

Disconnect "the faucet end" of existing hose (typically 1/2" industry standard) and connect to port

F - HOT WATER FAUCET CONNECTION 1/2" connection
Using one of the hoses shipped with system connect one end to port and the other end to industry standard 1/2" faucet connection.

G - COLD WATER SUPPLY CONNECTION 1/2" connection

Disconnect "the faucet end" of existing hose (typically 1/2" industry standard) and connect to port

H - COLD WATER FAUCET CONNECTION 1/2" connection

Using one of the hoses shipped with system connect one end to port and the other end to industry standard 1/2" faucet connection.

OPEN LOOP SYSTEM (uses cold water line as return line)  and CLOSED LOOP SYSTEM (when a dedicated hot water return line exists in the home)

ReadyTemp is compatible with both open loop and closed loop water systems. 
 

             SIMPLE  INSTALLATION

EASY  AS        ONE             TWO           THREE 

ENDLESS PLUG-N-PLAY CONTROL

EXAMPLES OF WIRELESS "OUTLET" CONTROL DEVICES ON THE MARKET

EASILY SWAPPED-OUT INSTEAD OF USING TIMER (WIRELESS WALL SWITCH, VOICE, etc.)

ReadyTemp is designed for quick and easy plug-n-play control customization.  Most any outlet controlling device can be swapped out with the digital timer to achieve any desired style of operation.  The outlet control devices shown above are examples of the countless types on the market.   These were all found on the internet, priced less than $20 each and typically available in big brand stores and home improvement centers. 

ON-DEMAND OPERATION USING RJ11 PHONE JACK

The RJ11 phone jack "C" on the control box allows for on-demand / push-button "single cycle" operation.  If used with a timer, push-button will act as an override adding additional convenience to a families lifestyle.  Wiring additional rooms with push-buttons is simple using a 3 to 1 or larger phone adapter as indicated in the below illustration identified as components "F" and "G".  Using any standard phone cord, simply cut one end off of the phone cord, strip the two middle wires and connect to any non-illuminating doorbell button or momentary contact switch.  Plug the opposite end of the phone cord into the RJ11 jack.  Anytime the button is pressed the system will run until the temperature setpoint is satisfied and then stop.  The system will not run again unless either the timer schedules operation or the button is pressed again.

F = Multi-Phone Adapter;  easy / cost efficient expansion of wired push-buttons
G = Standard Door Bell Button; any momentary contact button or switch. 

         Note: RJ11 contacts do not  have current / electricity, activation is by closing circuit / momentary contact
 

For more control customization to fit any desired lifestyle click on the blinking wireless antenna.